Classification of refractory materials

There are various ways to classify refractory materials, mainly based on their refractoriness, shape, chemical composition, che...

If the phosphate brick is used for the lining of the rotary kiln, as long as the reasonable size is calculated based on the diameter of the kiln lining, it can be either axe sha...

What is the normal temperature of the electrolytic cell

The normal temperature range of an electrolytic cell is usually between 945-965 degrees Celsius, in order to e...

Construction requirements of wear-resistant and fire-resistant plastic

(1) Before construction, ensure that the laying site is clean. If refractory plastic is used fo...

This article describes the formation and properties of streaks, analyzes the changes in the refractive index and expansion coefficient of streaks and the stress generated. Point...

01 Working pool

Pool wall: The operating temperature is 1300~1450℃, and fused α-Al203T.C or fused AZS (oxidation method) bricks are selected. Selection basis: less ...

Low-cement and ultra-low-cement castables are an important type in the field of refractory materials. They are characterized by a significant reduction in cement content, thereb...

This area roughly includes the entire upper structure of the melting pool itself, plus the small furnace neck, but does not include the regenerator or any regenerator refractory...