The refractory materials used in glass kiln regenerator mainly include lattice body, grate arch, regenerator top arch, side wall and middle partition wall. The temperature of th...
When there is no finished refractory slurry and it needs to be prepared on site, it should be accurately measured and mixed evenly, and the slurry should be used up during the s...
The electric arc furnace is an electric furnace that uses electric arc energy to smelt metals. The electric arc furnaces used in industry can be divided into three categories: t...
Top-fired hot blast furnace
The construction of refractory materials for top-fired hot blast furnace can be mainly divided into four parts, namely labyrinth masonry, ...
① The demoulding process of refractory prefabricated parts needs to be operated with caution. Usually, demoulding can be carried out only on the premise that the hardening time...
In glass melting furnace, in addition to the contact with flames mentioned above, the entire kiln pool from the melting part, cooling part to the forming part is in contact with...
After a long period of high-temperature operation, the refractory brick lining and various equipment used in the glass melting furnace have shown varying degrees of aging. In pa...
Hydrogen sulfide incinerator is a professional incinerator for treating hydrogen sulfide tail gas. Its working conditions are very bad. The furnace is full of acidic gas, which ...