the masonry blast furnace, hot stove and lime kiln

Jun 23,2017
In the masonry blast furnace, hot stove or lime kiln, the application of two kinds of brick with the masonry can be built with different diameter ring to adapt to the furnace size and furnace diameter with height changes. Generally, the refractory bricks G1 are fitted with G3 or G5 wedge bricks, and the refractory bricks G2 cooperate with G4 or G6 wedge bricks. As the diameter of the ring in the masonry process is different, so the number of straight brick and wedge brick is also different.

Furnace lining masonry, the ring seam requires all the wrong stitch masonry, asked not to cut the brick, if forced to cut the brick, must be cut surface grinding, masonry thickness and the wrong seam is through the brick length of 230mm and 345 mm different brick type combination, by adding masonry thickness can increase or decrease 115mm and reach the wrong seam, the thickness change of less than 115 mm, the use of masonry and furnace shell or masonry and the gap between the filling wall to adjust.